The Best Water Leak Detectors for Your Home
Water plays an essential role in our homes, but it can also wreak havoc. Burst pipes, leaky toilets, and misbehaving appliances can dampen your day. The best water leak detector can reduce the risk by alerting you to problems quickly so you can act to prevent severe damage. Around one in 60 insured homeowners file a claim related to water damage or freezing every year, according to the Insurance Information Institute, and the average cost of the property damage is about $15,000. The longer a leak goes undetected, the more damage it does, destroying furniture and decorations, spawning mold and fungi, and even threatening structural integrity.
We’ve tested many smart leak detectors over the past few years, and these are the ones we recommend. Insurers love them, so before you go shopping, it’s worth checking with yours to see what they offer or recommend and whether installing a leak sensor can reduce your premiums.
Updated January 2026: We've added a newly tested water leak detector that we don’t recommend, and added more info to our FAQ.
Know These Basics Before You Shop
Water leak detectors can detect water pooling, and some can also detect water dripping or even humidity rising. Premium water leak detectors monitor the flow of water in your pipes. All connect to a hub or directly to your Wi-Fi network to send alerts when they detect a problem.
Some water leak detectors have cables with sensors on the end, some have water-sensing cords, and others are self-contained with sensors on the top or bottom or both. You have the option of extension nodes with some detectors. At the premium end of the market, you can get a water shutoff valve that must be fitted to your pipework to measure the flow of water and even automatically shut it off when a leak is detected.
Unless you have a single problem spot or appliance you want to monitor, you will likely need several water leak detectors to safeguard your whole home. Think about the areas you want to cover when considering what kind of detector would work best for you and how many of them you need.
Anywhere you have concerns about a potential leak, so under the kitchen sink, behind toilets, next to washers, humidifiers, water heaters, and other water tanks. They can also be useful for monitoring basements, lofts, garages, and other outbuildings or vacation properties. If you have a problem area where you have had a leak before or an aging appliance you are worried about, those are good spots to place water leak detectors.
Water Leak Detector FAQ
All the smart water leak detectors we tested send push notifications when there’s a leak, but some also send emails and texts. Most have some kind of built-in audible alarm sound, but some offer separate sirens or can be configured to send alerts through smart speakers or other devices. It’s worth checking whether your pick supports disconnection alerts to warn you when the connection is lost, which may happen if power or Wi-Fi goes out.
Most detectors are battery-powered, but you can get some that plug directly into outlets. You can set and forget plug-in detectors, but batteries give you more flexibility with placement, and the companion app will typically warn you when the batteries need to be changed.
Most smart water leak detectors connect directly to your Wi-Fi router or a hub, so make sure that you have a decent signal wherever you are installing them. Most of the devices we tested only connect to Wi-Fi on the 2.4-GHz band. Remember that they need internet access to alert you to any leaks or problems when you are away from home. If your internet goes down, they will simply act as local alarms.
While companion apps and mobile notifications are typical, some detectors support smart home standards, enabling you to access detectors in your chosen smart home app and set up triggers or automation. For example, you could set a water alert to flash your smart lights or select a temperature that triggers heating or air conditioning to turn on.
With some high-end systems, you can install a water-monitoring device with an automatic shutoff function, enabling any leak detection to shut off your water supply. But these systems are usually expensive and require professional installation.
Some smart water-leak detectors can also monitor the temperature and humidity, potentially alerting you to the danger of frozen pipes or damp environments that could indicate a leak nearby. You can generally review the temperature and humidity over time, so you can immediately spot any notable changes that need investigation. With smart home automation, you can also trigger heating or fans at certain levels to reduce the risk of damage.
How We Test
I test every smart water leak detector by dripping water on top, pooling water slowly beneath, and flooding rapidly to see how effective the water leak detection is and how quickly they alert. I install every app, check different alert options where applicable, and ensure alerts come through on my phone, whether I’m connected to Wi-Fi or the cellular network. I also remove the batteries or unplug each water leak detector to see if it shows as disconnected correctly in the app or sends any alert, then plug it back in or reinsert batteries to see if it recovers.
When detectors offer additional features, such as humidity or temperature tracking, I test and compare them with my Tado system or SwitchBot Hub 3. Our top picks continue to be used over months, so we can be confident that the performance does not degrade.
Best for Most People
Shaped like a drop of water, this versatile device alerts you within seconds of detecting a leak and offers compelling extras like temperature tracking at an affordable price. It was a breeze to set up via the app (Android, iOS) and was swift and consistent in my testing, firing off a push notification by phone, email, and text message every time it detected water. (You can configure the alerts.) It also sounds an alarm and flashes a red LED. The device has three metal feet to detect water, but you can mount it and attach the included wired disc sensor instead. Moen also offers a 6-foot leak-sensing cable ($25) that can detect water along its entire length, and you can potentially chain together up to three of these to cover a larger area.
The Moen Smart Water Detector provides temperature and humidity readings in the app and tracks both over the previous 24 hours or seven days. You can set thresholds of temperature or humidity to trigger warnings. You can also reset alarms from the app, which is a nice touch, as it’s not pleasant fumbling to press a button on a detector in a hard-to-reach spot. On the downside, the alarms are relatively quiet compared to other detectors. The device also requires a single CR123A battery, though you get one in the box. It has no real smart home integration.
Specs Alerts 80 decibel siren, flashing LED, push notifications, email, SMS Power CR123A battery (included) In the Box 4-foot extension cable with Remote Sensing Disc Extras Temperature and humidity tracking Upgrade Pick
Unlike many of the products in this guide, Moen's Flo Smart Water Monitor installs in line with your home's water supply line and features an automatic shut-off if it detects a water leak. Moen recommends installation by an expert—I found a licensed plumber near me using the company's Pro Finder tool—and they completed the installation in 30 minutes. (You can do it yourself if you feel comfortable around plumbing.) You'll need a good Wi-Fi signal where your water line is and a nearby outlet, though Moen does sell an extension cable. Once installed, it takes around two weeks to learn your home's daily water usage, so I made sure to do all the things I typically do and then some so that it wouldn't find me running the laundry twice a week too unusual. If it detects a leak or high water usage, it will send you a notification instantly, and you can tap a button in the app to turn off your water line. If you don't act on it within a few minutes, it will automatically shut off your home's water. Handy in case you didn't see the notification.
I love the amount of data at my fingertips through the Flo by Moen app. I can see how many gallons of water my home uses in a day or week, and you can set goals if you want to curb water usage. The app breaks water usage down by fixture, too, so you can see how much your shower, toilet, and appliances use on a daily or weekly basis. Every night, the system runs an Auto MicroLeak Test to see if any pipes or faucets are leaking, and so far, my house is in tip-top shape. I strongly recommend you pair this with Moen's Smart Water Detector (our top pick) to cover your bases. I've been using this system for a year, and it's already given me greater peace of mind, but I'll note if anything changes in the future. —Julian Chokkattu
Specs Alerts Push notifications, SMS, email, phone call Power Plugs into outlet In the Box 10-foot power adapter, installation fixings Extras Automatic shut-off
Runner-Up
With features very similar to our top pick, the Phyn Smart Water Sensor proved reliable, alerting me to water quickly with piercing beeps, a text message, and a push notification. Unfortunately, the setup was annoying; I had to reload and re-enter all my information because the app was flaky. The chunky disc design has three metal feet, and there’s an LED that flashes red when it detects a leak. You can add an Extension Node ($10) (a wired disc that plugs in) or a Water Sensor Cable ($27) (a 4-foot cable that can detect water along its length—you can daisy-chain up to three)—but neither comes in the box.
The Phyn Smart Water Sensor also tracks temperature and humidity, with charts displayed in the app, and you can set alert triggers at certain thresholds. It wasn’t as swift as our top pick, but it was consistent in my testing. It takes two AA batteries (provided). Sadly, you have to press the button on the device to stop the alarm—an in-app option would be better. It’s also relatively large (the size of a hockey puck) compared to other detectors I tested, limiting your placement options. And once again, there’s no real smart home integration. Phyn also offers a water monitor and automatic shutoff device ($540), but I haven't tried it.
Specs Alerts 80 decibel siren, flashing LED, push notifications, SMS Power 2x AA batteries (included) In the Box 4-foot extension cable with Remote Sensing Disc Extras Temperature and humidity tracking Best for Large Properties
From the simple setup to the swift and reliable alerts, YoLink’s water leak sensors impressed. Scan the QR code on each device and press a button to add it to the app. There are three types of sensors: The first detects water dripping onto or rising beneath it, the second has a cord that detects water along its length, and the third has water-sensing electrodes on the tip, making it suitable for monitoring the water level in a tank.
All three came with two AAA batteries installed and detected water swiftly and reliably in my testing while sending notifications to my phone. YoLink’s sensors use the long-range (up to a quarter of a mile) and low-power LoRa standard, and they don’t need a Wi-Fi signal, as they link directly to a hub. The hub connects to your router, ideally via the Ethernet cable provided, and must be plugged into an outlet. The starter kit we are linking here includes the hub and four Water Leak Sensor 1 units.
The sensors detect any water immediately, alerts come through as a notification on your phone, and the sensor flashes red. But there’s no sound from the Water Leak Sensor 1 or the standard hub. The Water Leak Sensor 2 and 3 ($30 each) have an inbuilt sounder, and you can buy a SpeakerHub ($30) or a wireless Smart Siren ($29) that goes up to 110 decibels. The straightforward app also allows you to set up customized alarm strategies and automation (YoLink offers a wide range of sensor types beyond water detection, and the ecosystem works with IFTTT and Alexa). While it may take a few devices and some tinkering to get things the way you want, YoLink’s system is affordable, versatile, and reliable, and LoRa is ideal for larger properties with Wi-Fi issues.
Specs Alerts Flashing LED, push notifications, email, SMS Power 2x AAA batteries (included) In the Box Hub and four sensors Extras LoRa offers up to 1,320-foot range
Best Budget Water Leak Detector
My budget pick comes from X-Sense, and you get three of the best smart water leak detectors I have tested with a hub for a very reasonable price. Plug the hub in and connect it to your Wi-Fi network (2.4-GHz band only), place the detectors in likely spots, and you're good to go. The detectors are round and fairly large, but I love that they have a channel on the top with two prongs because this design immediately alerts if there are any drips. The four prongs on the underside are equally good at detecting pools of water (as little as 0.4 mm).
Water triggers the detector to emit a loud beeping, and the LED flashes red. You can also choose from three alert sounds on the hub, which go up to an ear-splitting 110 decibels. You can tweak the volume in the app and use the physical buttons on either to stop the alarm. Alerts also came through reliably and swiftly on my phone as push notifications with an alarm sound. Alerts worked equally well whether my phone was connected to Wi-Fi or the cellular network. Each sensor takes two AAA batteries, and I love that you can see the battery level in the app (it also sends warnings when power is low).
Specs Alerts 100 decibel siren, flashing LED, push notifications Power 2x AAA batteries (included) In the Box Hub and three sensors Extras None
Other Leak Detectors We Like
TP-Link Tapo T300 Water Leak Detector for $20: What I like most about these water leak detectors is that they have four metal probes underneath and two above, so they swiftly detect water dripping on top or pooling beneath. Alerts came through reliably to my phone as push notifications within one to two seconds. The alarm is fairly loud (90 decibels), though you can reduce the volume in the app or even mute it. The TP-Link Tapo T300 requires a Tapo Smart Hub to function. Each hub can link up to 64 Tapo motion sensors, door or window sensors, switches, and other devices. The hub is a simple rectangular device that plugs directly into an outlet and connects to your Wi-Fi network. It doesn’t sound an alarm by default, but you can mirror the sensor’s alerts in the Tapo app. Another feature I like is the option to push the button on top of the sensor to have the hub confirm that it is within range. Each T300 sensor requires two AAA batteries (included) that TP-Link says can last for up to three years. There is a battery icon in the app to show the remaining power and warn when it is running low. As well as having the water leak alarm trigger your hub to sound, you can have it turn off devices in the vicinity if they are connected to Tapo smart plugs (I tested this, and it worked as expected). The T300 is a bit bulky, so it might not fit everywhere you’d like to place a sensor, and it continued to show as functioning normally in the app for several hours after I removed its batteries.
Eve Water Guard for $110: With HomeKit support, this is a good choice for iPhone owners with a home hub (an Apple TV or HomePod). HomeKit is also ideal if you have privacy concerns because you can be certain no data will be shared with third parties. There is an Eve app, but you can also view the Water Guard and set notifications directly through the Apple Home app. It plugs directly into an outlet and has a 6.5-foot cable that senses any water and immediately alerts you on your iPhone, iPad, and Apple Watch, wherever you are, provided you have a working home hub. It also flashes red and has a 100-decibel siren. You can review alarm history, test or mute alarms, and update device firmware in the Eve app. The Eve Water Guard only detects water, but the sensing cable works well, triggering quick alerts and covering a large area. It needs a power outlet, which also limits your placement options, but you never need to worry about battery life. The obvious drawbacks are the complete lack of support for Android, the fact that you need a home hub for remote alerts and management, and the relatively high price. You can also add 6.5-foot sensing cable extensions ($20 each) up to a total length of 500 feet.
Govee Wi-Fi Water Sensor (3-Pack) for $55: Quick and easy to install, Govee's sensors send alerts as push notifications and emails. They also boast one of the loudest sirens I tested (100 decibels). Mercifully, you can shut off the ear-splitting sound from the app. The sensors are quite small, and they offer drip detection on top and metal feet for leak detection underneath, but there’s no option to add a disc or cable. The Govee Wi-Fi Water Sensors only detect water, but they are effective. I found alerts triggered within a few seconds. The app is basic but works well and displays alert history. Unfortunately, these sensors require a Govee Wi-Fi hub (included in the box), which takes up a power outlet (and may block an adjacent outlet), and each sensor takes two AA batteries (also provided). One concern with these sensors is that I failed to receive alerts when my phone was connected to mobile data rather than Wi-Fi, though the email did come through. There’s also no smart home integration. You can add additional individual sensors at $13 each or buy five for $50.
First Alert L1 Wi-Fi Water Leak and Freeze Detector for $75: This large flood sensor, branded First Alert, works with First Alert or Resideo apps and accessories. It sends push notifications and emails to alert you to any leak and sports a 100-decibel alarm that you can stop with the side button. The sensor was relatively slow to alert in all my tests, and the push notifications only came through when my phone was connected to Wi-Fi. The 5-foot water-sensing cable allows you to cover a much larger area, and I found it alerted faster. The detector connects directly to Wi-Fi, so you need a decent signal. This sensor can also track temperature and humidity, but not very accurately (it consistently overestimates temperature and underestimates humidity). The two AA batteries provided are supposed to last up to two years.
Eufy Security Water and Freeze Sensor for $35: If you have Eufy's security system, this could be the best water leak detector for you, but it requires a HomeBase 2 or HomeBase 3 ($150) to connect to. It proved quick and reliable to alert, offers long-range connectivity (up to 200 meters), and can warn you if the temperature drops below freezing. You receive alerts on your phone via the Eufy Security app, and you can configure the connected HomeBase to sound an alarm, but the detector doesn’t make any sound. You can track battery life in the app. A full battery lasts up to two years. Sadly, it doesn’t show the temperature; it simply alerts below freezing.
Ikea Badring for $9: Super affordable, with a simple design, this Zigbee detector alerted reliably during testing. The Ikea Badring is a good choice if you already have an Ikea Dirigea hub ($109) to connect to for notifications on your phone. But it works out quite pricey if you don't, and it's not compatible with other hubs, such as the Ikea Tradfri. It does have an alert sound that goes as high as 90 decibels, but only at proximity; it doesn’t carry far, and I wouldn’t rely on it alone. You must supply your own AAA battery, and this leak detector is only IP44 rated, so there’s a risk of malfunction if it gets immersed.
SwitchBot Water Leak Detector for $18: This rectangular detector triggered swift alerts in all my tests with a 100-decibel alarm. With prongs on top and underneath, this device was quick to detect water. It connects directly to Wi-Fi, so you don’t need a hub, and it can send push notifications and emails, though you must set them up in the app. Unfortunately, the push notifications did not come through when I was out of the house, connected to a cellular network instead of Wi-Fi. Smart home connectivity is good (Amazon Alexa, Google Assistant, and IFTTT), and you can set up automation in the SwitchBot app, which makes this a versatile option, particularly if you have other SwitchBot devices. SwitchBot says the two AAA batteries provided are good for up to two years.
AiDot Winees Water Leak Detector S1 Plus (3 Pack) for $60: Connect the plug-in hub to your 2.4-GHz Wi-Fi, place the three circular detectors in likely leak spots, and you are set. You can pair up to 10 with the hub and configure it to send emails and SMS messages on top of app notifications when there’s a leak. The probes on the underside of each detector are quite far apart, and it takes 2 millimeters of water before the alarm is triggered. It failed to go off with a steady drip on top, but the alarm sounded as soon as water pooled underneath. The alarm goes up to 100 decibels, but I like that you can tweak the volume and duration for alarms. You can cancel alarms through the app or by pressing the buttons on the hub. These detectors take CR2 batteries that are good for up to a year, and there’s an indication in the app when they die. When I removed a battery from one of them, it took the app a few hours to update and show it as offline. One last downside is that the hub is circular, so it may block adjacent outlets. Support for IFTTT is a potentially handy extra that could trigger a water shut-off or a light to flash red when a leak is detected.
Aqara Water Leak Sensor for $19: This Zigbee sensor is best used with Apple’s HomeKit, and you need an Aqara hub (sold separately). The company makes a good security camera that doubles as a hub and offers a full range of smart home sensors. These small circular water leak sensors are very low to the ground, so just 0.5 mm of water underneath is enough to trigger an alarm. Dripping on top won’t set them off, but an iPhone notification is triggered as soon as water pools beneath where the probes are. You can also have your connected hub play an alarm and trigger automations through HomeKit. The sensors take CR2 batteries and can last up to two years.
Stitch by Monoprice Water Leak Sensor for $22: This affordable water leak detector has a design that’s similar to our top pick. The main body is round, with metal feet to detect water pooling, and it slots into a bracket for wall mounting. It comes with a coin-sized plug-in extension that stretches up to 3.8 feet. Both the main detector and extension were quick to sound the alarm and send notifications to my phone when wet (though the on-device alarm is not very loud). It takes a single CR2 battery, displays the remaining power in the app, and alerts you when it’s time to change batteries. Unfortunately, the app is basic and poorly translated. You have to dry the detector to stop the alarm, and it took too long to warn me when it went offline (weirdly, the offline detector is toggled off by default in the app settings, so I had to switch it on). You can get this a bit cheaper by buying directly from Monoprice.
Leak Detectors to Avoid
We did not have a great experience with every water leak detector we tested.
Shelly Flood Gen 4: Shelly’s fourth-generation leak detector sounds great on paper, with support for Matter and impressive connectivity via Zigbee, Bluetooth, and dual-band Wi-Fi. I had no issues setting it up in my Google Home app by scanning the Matter QR code. Each IP44-rated unit requires four AA batteries (included), and you stick or screw it to the wall, and plug the extendable 6.5-foot leak detection cable into the bottom to trail around the area you want to monitor. While the detector correctly sounded an alarm when I dripped water on top, no alert came through the Home app, and it continued to show “No leak.” Multiple tests with two different detectors failed to alert through the Home app, making this impossible to recommend. I also tried setting up through the Shelly app, but it refused to load.
Swann Leak Alert Sensor: While this battery-powered water detector (two AAAs) is affordable, I had a terrible time setting it up. Your phone must be on 2.4-GHz Wi-Fi, but even then, it took me multiple attempts to connect. Frustratingly, you must remove the screw panel to reset it, because there’s no option in the app. Alerts came through to my phone around a minute after I soaked the sensor, but the Swann app is slow and clunky.
Power up with unlimited access to WIRED. Get best-in-class reporting and exclusive subscriber content that's too important to ignore. Subscribe Today.
Comments
Back to top
Wired Coupons
Exclusive 10% Off Squarespace Promo Code
Buy an eligible French Door Refrigerator and get a free Single Door Refrigerator (up to $515 value)!
10% off Dell Coupon Code for New Customers
Samsung Promo Code: 10% off TVs
10% off Canon promo code with upgrade
$25 off $25+ DoorDash Promo Code for New Customers